LaMoyne Star and Mini Pinwheel Quilt

As mentioned in my post, I made a quilt top following a technique shared on a website I came across.  However I added my spin to the blocks resulting in this top:

Paisley Quilt Done

What follows are instructions for making this quilt top.  I’ll explain how I made the two blocks used in this top and you can make any number of blocks you like for the size quilt that you desire.  Using nine blocks plus the one outer border, this top finished at 42 1/2″ square.

Star Block (with Pinwheels from the “waste”)

You will need two contrasting colors/patterns for your star points and a background fabric (I used white so the stars would really pop).  I’ll refer to the fabrics for the points as “dark” and “light” in the instructions.  All seams are stitched with a 1/4″ seam allowance.

Step 1 – cut the following pieces:

  • 4 dark rectangles measuring 2 3/8″ x 5″ each
  • 4 light rectangles measuring 2 3/8″ x 5″ each
  • 8 background squares measuring 2 3/8″ each
  • 8 background rectangles measuring 3 1/8″ x 5″

Paisley Quilt Step 1

Step 2 – On the back (wrong side) of all 8 of the background squares, draw a diagonal line from corner to corner (I used a pencil)

Paisley Quilt step 2

Step 3 – Lay one background square on the bottom of each light and dark rectangle, right sides together, then stitch on the drawn diagonal line as illustrated below.  The dark rectangles and the light rectangles should have the stitched line going in the opposite direction.

Paisley Quilt step 3

Step 4 – Trim off the bottom of the square 1/4″ from the stitched diagonal line, like below:

Paisley Quilt step 4

Step 5 – Press the background fabric in opposite directions so that you can “nest” the seams later when you are sewing pieces together:

Paisley Quilt Step 5

Step 6 – Place a background rectangle on each dark and light strip set, right sides together, and sew along the seam as pictured below.  Press the seams in opposite directions as described.

Paisley Quilt Step 5b

Step 7 – On the back (wrong side) of each unit with the dark fabric, draw a diagonal line from corner to corner:

Paisley Quilt step 7

Step 8 –  lay a dark unit on top of a light unit, right sides together, and line up the seams by “nesting” them together.  Because you pressed your seams in opposite directions they should bump together:

Paisley Quilt Step 7b

Step 9 – I chose to pin my two units together, holding the nested seams better,  then sew on the drawn diagonal line.  Because you are sewing over a couple of seams I felt this would keep it more stable.

Paisley Quilt step 7c

Step 10 – Draw another diagonal line 1/4″ away from your stitch line, then sew another stitch line 1/4″ away from the drawn line.

Paisley Quilt step 8

Step 11 – Cut this unit on the drawn line between the two diagonal seams you just sewed:

Paisley Quilt step 9aPaisley Quilt step 9b

Step 12 – Open the two pieces and you’ll have a block with 2 star points and a block with a section for your mini pinwheel.  Press your seams towards the dark fabric on each of these blocks.

Paisley Quilt step 9c021

If you’ve already sewn and cut all of your pieces as described above you’ll have four blocks with star points and four blocks with what looks like mini half-square triangles.

Finishing the Star Block

Sew your star points as follows:

Paisley Quilt step 10

Place the top right and left halves right sides together and stitch. Press the seam to the left.

Place the bottom right and left halves right sides together and stitch. Press the seam to the right.

Place the top and bottom units right sides together and “nest” the seams.  Sew and press the seam to one side.

Paisley Quilt step 11

To finish this block I added four 2 1/2″ wide strips all around the sides, sewing the right and left sides on first and then the top and bottom strips.  Measure the sides of your blocks to determine the length needed for each side.

Paisley Quilt step 13

Finishing the Mini Pinwheel Block

Square off your four mini half-square triangle blocks to equal 4 inches:

Paisley Quilt step 14b

Lay out your blocks to form a pinwheel:

Paisley Quilt step 16

Like the Star block, sew the top two blocks together and press the seam to the right, then sew the bottom two blocks together pressing the seam to the left.  Join the top and bottom units together nesting the seams.

I then bordered this block with fabric strips measuring 3 1/2″ wide.

Paisley Quilt step 17

The Star and Pinwheel blocks each measure about 13 1/4″.

I sewed my blocks together first in columns, and then each column to each other.  I bordered the quilt top in black 2 1/2″ strips.

I hope this tutorial helps you to make your own version of this quilt.

4 thoughts on “LaMoyne Star and Mini Pinwheel Quilt

Leave a Reply to Evelyn Rodriguez Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s